Each in small box lined with plastic bag,then in carton.
1 - 10
11 - 100
To be negotiated
DR series Digital Resistance Meter with auto judgement(0.01-100 Ohm)
When the value of the inspected resistance (Rt for short)is between the setted high and low limit values under setted continious sampling times,then the inspected as a qualified products.Otherwise the meter will keep on inspection.When Rt is not between the setted high and low limit values under NCS times continoius sampling,then the inspected as a unqualified products.The relative relay will output.
1, Input:0.01-400Ω,0--50KΩ,others set by user,elctronic Meg Ohm Meter 0-500M can be built when indicated, with NG OK or HI LO GO output control,OK means auto reset,NG means handly reset, high sampling speed, widely used in eletronical production line for control of auto inspection, simple to operate, and practical.
2, Signal input can select data or peak value holding fuction,20 segments non-linearity input, when input 0-5k RTD, it can act as electrical ruler.
3, Output:4 lines output,with various output mode selectable:UPPER/LOW or intevals,etc..
4, Isolate analogue output: 0-10mA or 4-20mA,with output range adjusted by software.
5, RS232 OR RS485 Modbus RTU protocol,connectable with various equipment,computer or PLC directly.